How to deal with the explosion-proof chain block when the chain cannot be pulled

Release time:

Apr 11,2022

For all the operation of explosion-proof hand chain hoist, professional and technical personnel have to deal with the method, can quickly solve the user's troubles, so that you can easily carry out the lifting work. That if you encounter in the use of the chain does not move, what steps should be done correctly.

For all operations related to explosion-proof chain block , professional and technical personnel have coping methods, which can quickly solve the user's troubles and allow you to easily carry out the lifting work. That if you encounter in the use of the chain does not move, what steps should be done correctly.

1. Never increase personnel or pull the chain. The most important thing in all operations is to suddenly increase the pulling force or call several staff members to pull the chain together. This operation is wrong, which will not only cause greater damage to the equipment, but also cause damage to the staff.
2. Stop all operations of the equipment immediately. After facing up to these failures, the first emergency measure taken is to stop all lifting work and find a way to remove the heavy objects safely.
3, carefully check each part of the equipment. As long as the user does the first two steps, the overall safety is greatly guaranteed, but then check the overall performance of the equipment to find the cause of the failure.
If the zipper cannot be pulled in the process of using the explosion-proof chain block, it must be handled according to the above steps. This treatment method is a good method for the equipment and the safety of all staff. I hope users will remember!

Focus on hot spots

President of China Foundry Association came to the company to investigate the renovation project of explosion-proof tools.

On January 9, 2022, Zhang Libo, President of China Foundry Association, Fan Qi, Vice President, and his party came to our company to investigate and guide the upgrading and transformation project of the sixth generation of explosion-proof tools. Mr. Yang Qinglai, Chairman of the Group Company, accompanied the explanation. During the investigation, President Zhang Libo highly praised Zhongbo Group's outstanding contribution to China's explosion-proof tools, affirmed the development of Zhongbo Group, and gave hope for the future of Zhongbo Group.

Hebei Botou Invited by Customers to Visit Customers in Shijiazhuang

Zhongbo Group was founded in 1983 and has been developing for 38th anniversary. It was successfully listed in 2015. From the beginning of the national customers, our products have now gone to the world. Thank you for having you---

Hebei Botou to build explosion-proof tools industry base

In recent years, Botou City, Hebei Province has vigorously built an industrial base for explosion-proof tools, introduced intelligent production equipment to improve the explosion-proof performance of products, and promoted the leading manufacturers of explosion-proof tools to move towards an intelligent, high-end, and international development route to help regional economic development. In 2020, Botou explosion-proof tool manufacturers will achieve an output value of 0.28 billion yuan, covering the whole country and exported to more than 100 countries and regions.

Company research and development of new products explosion-proof seamless container with successful listing!

The company's technology research and development center, held a new project acceptance work meeting, research and development of new products explosion-proof seamless containers through acceptance, officially listed. Explosion-proof containers are widely used in flammable and explosive places with the explosion-proof characteristics of no spark and no detonation. The material for making explosion-proof containers is explosion-proof copper alloy. The original production process is to cut the plate into the corresponding shape and weld it. Such as explosion-proof bucket, fire bucket, etc. However, these process products have many problems and disadvantages: such as irregular appearance. Cutting, forming, crimping, welding, all hand-made, can not guarantee the appearance of normative, consistency. Second, the strictness is bad. Handmade

Hebei Botou Safety Tools (Groups) Co., Ltd. invites merchants to participate in the exhibition

Thank you for your support and trust to Zhongbo Group. Our company is scheduled to participate in the 68th Autumn National Hardware Fair in 2019 from September 20, 2019 to September 22, 2019 at Shandong Linyi International Convention and Exhibition Center. Booth number: A188. From September 26, 2019 to September 28, 2019, he participated in the 12th China (Dongying) International Petroleum and Petrochemical Equipment and Technology Exhibition at the Yellow River International Convention and Exhibition Center in Dongying, Shandong. Booth number: T103. I hope that through this opportunity to discuss and communicate with your company, so that we can have more in-depth cooperation. You are cordially invited to attend.